ASP ATW
Other Cutting Oil Emulsifier
ASP 100
Cutting Oil Emulsifier
ASP ATW
ASP ATW is a specially designed cutting oil emulsifier to work in higher TDS of water. ASP ATW is free of Rosin, SPS, Amides and biocides. It is mixture of specially formulated esters of edible oil fatty acids to suit the purpose. It gives excellent performance in higher TDS and water hardness.
The Primary Application of ASP ATW is as a Cutting Oil Emulsifier.
Properties & Performance
ASP ATW has to be used 12.5 to 13 % w/w to get the better performance. The additive forms a good emulsion at higher TDS up to 3000 ppm. Emulsion also provides excellent corrosion protection and good foaming stability. If in case you face foaming problem water based defoamer has to be added in cutting oil.
ASP ATW can be used in SN 70 and HA up to 12.5 to 13 % level to get the same performance.
5 to 10% HA in SN 150 and SN 70 will increase the performance. 100 % use of HA instead of SN 70 and SN 150 will give excellent performance and can be used as temporary rust preventive to protect the parts for seven to ten days indoor.
Caution: ASP ATW emulsion should not be mixed with any other cutting oil emulsifier; this will cause separation. ASP ATW based cutting oil should not be mixed with any other cutting oil. To change over thorough cleaning of storage and pit has to be done.
Note: Do not heat above 60OC
This Information is for Guidelines only.
Download this Product Data Sheet
Other Cutting Oil Emulsifier
ASP 100
Looking for Transparent Water based- Cutting Oil Emulsifier?